Abrasives Hardeners

		SECTION-5 HARDENERS/EMERY ABRASIVE AGGREGATES:
		As with all building and construction products, Anti-Hydro cement additives are governed by local, state and federal regulations which you should read and follow. You are always welcome to call us at 1-800-777-1773 (9:00am to 5:00pm Weekdays Eastern Time) and ask for our concrete consultants. They can always advise you on the proper use of all Anti-Hydro products. Always read and follow the cautions and instructions contained on all Anti-Hydro products. Spec. 5-1 A-H Emery Floor Shake-On: A Heavy Duty Floor Hardening Emery Shake-On That Has Been Extensively Used For Abrasion And Chemical Resistant, Non-Rusting, Concrete Floors. A-H Emery is a specially graded form of "Corundum" (aluminum oxide). It is the hardest, natural mineral aggregate available. The A-H Emery shake-on method is unequaled for producing industrial floors that are durable, wear resistant, non-slip, and non-rusting. Recommended usages include dairy and food plants, automotive facilities, distribution operations, cargo handling facilities, and sanitary engineering projects. Spec. 5-2 (Go To Top) A-H Emery Floor Topping: A Heavy Duty, Emery Aggregate Floor Topping That Has Been Extensively Used For Hardest, Non Rusting Concrete Floors. For extreme Conditions Of Abrasion, Impact, And Chemical Attack. A-H Emery A-1 size is a specially graded form of "Corundum", rich in aluminum and ferric oxide. After the diamond, A-H Emery is the hardest natural mineral aggregate, having a MOH hardness of 8 to 9. The A-H Emery topping system is a granolithic concrete overlay that is unequaled for overall durability and possesses non-slip and non-rusting characteristics. A-H Emery concrete toppings are the most wear resistant floors obtainable and are particularly appropriate for Tipping Room floors where both abrasion and chemical resistance are the critical requirements. A-H Emery concrete toppings are ideal for two conveyor lanes, aisles, and heavy industrial production areas (automotive, steel, chemical). Spec. 5-3 (Go To Top) *A-H Emery Non-Slip* : A Natural Aluminum Oxide Non-Slip Aggregate That as Been Extensively Used For Non-Slip, Wear Resistant, Concrete Surfaces.** A-H Emery is a specially graded form of "Corundum" (aluminum oxide). It is the hardest, natural mineral aggregate available. A-H Emery grits produce safe, durable surfaces with the greatest economy. The polyhedral shape and hardness of the A-H Emery particles give a non-slip, wear resistant surface. It is extensively used for producing non-slip concrete surfaces in stair treads, ramps, laundries, industrial plants, warehouses, and sidewalks. Spec. 5-4 (Go To Top) A-H Emery Heat & Corrosion Resistant: Hardest, Non-Rusting Emery "Corundum" Aggregates. A-H Emery And Aluminous Cement Produce Heat And Corrosion Resistant Concrete Toppings and Mortars That Withstand High Temperatures And Chemicals. A-H Emery "Corundum" and aluminous cement produce concrete toppings and mortars that are needed to withstand high temperatures. A-H Emery-aluminous cement floors are recommended in coke plants, steel mills, high temperature washing rooms, breweries, bakeries, dairies, distilleries, sugar mills, and tanneries. Heat resistant mortars are used in shotcrete and trowel applications for kilns, stacks, and flue linings, as well as corrosion resistant coatings. Spec. 5-7 (Go To Top) A-H Silicarbid: A Specially Graded Silicon Carbide Grit That Has Been Extensively Used To Produce A Hard, Slip Resistant, Sparkling Or Reflective Surface. Sprinkled Or Broadcast On Concrete Or Epoxy Surfaces. A-H Silicarbid is composed of specially crushed and graded silicon carbide. It is the hardest commercially manufactured abrasive. When sprinkled on concrete or epoxy, it produces a hard, slip resistant, sparkling surface. A-H Silicarbid is recommended for sidewalks, ramps, platforms, airport, railroad and bus terminals, and any other area where reflective non-slip qualities are required for safety and eye appeal. Spec. 5-8 (Go To Top) A-H Alox: Specially Graded Aluminum Oxide Grits That Have Been Extensively Used To Produce A Hard, Slip Resistant Surface. Sprinkled Or Broadcast On Concrete Or Epoxy Surfaces. A-H Alox is an abrasive crushed from virgin first quality aluminum oxide ore. A-H Alox contains 95% aluminum oxide and is of extreme hardness, registering 2050 on the Knoops Scale and 9 on the Moh Scale. A-H Alox is recommended for sidewalks, ramps, platforms and other surfaces where non slip qualities are required for safety.