 |
|
|
|
|
A-H Acuricon is a 35% solution of special 42º Baume sodium silicate combined with penetrating and wetting agents. A-H Acuricon is applied to concrete surfaces to produce water retention in accordance with ASTM C-309. In addition to curing concrete, A-H Acuricon chemically hardens the surface by reacting with the cement binder of the concrete to produce a durable and dustproof surface. When A-H Acuricon is used in accordance with specifications, it will not interfere with the bond of adhesive applied flooring materials such as asphalt, vinyl or rubber tile, or with properly applied concrete coatings. A-H Acuricon is available either clear or with fugitive dye. The dye is used for identification purposes and disappears completely after exposure to heat and light.
In order for concrete to reach ultimate hardness, strength, and durability, it must be properly cured. Concrete that is improperly cured will not develop its optimum properties. On most construction projects it is difficult to provide continuous water curing. The use of A-H Curing Compound eliminates the need for repeated water curing of the concrete. A-H Curing Compound #2 DR is a dissipating resin base material formulated to meet and exceed the requirements of ASTM C-309 Type 1 (liquid membrane forming compounds for curing concrete). It forms a continuous uniform film that adheres to damp surfaces and restricts moisture loss from fresh concrete. A-H Curing Compound #2 DR is designed to dissipate with exposure to ultra violet light and construction traffic.
In order for concrete to reach ultimate hardness, strength, and durability, it must be properly cured. Concrete that is allowed to dry out before the hydration process is completed, will not develop its full physical properties. This is particularly important for concrete surfaces that are exposed to brilliant sunlight. A-H Curing Compound #2 WP WB (White Pigmented) is a positive solution for protecting exterior concrete exposed to bright sunlight and high temperatures. The white coating reflects the sun’s rays and protects fresh concrete against thermal shock at its most susceptible stage. The protection from sun and high temperature results in a concrete that is resistant to premature cracking and spalling. A-H Curing Compound #2 WP WB is a resin emulsion type curing material. It forms a continuous uniform film that adheres to fresh concrete and restricts moisture loss. A-H Curing Compound #2 WP WB meets VOC (volatile organic compound) levels, and provides relative non-flammability.
In order for concrete to reach ultimate hardness, strength, and durability, it must be properly cured. Concrete that is properly cured will develop its optimum properties. On most construction projects, it is difficult to provide continuous water curing. A-H Curing Compound #2 DR WB eliminates the need for repeated water curing of the concrete. A-H Curing Compound #2 DR WB is a dissipating type curing compound. It chemically breaks down with time and exposure (ultra violet light, construction traffic, etc.), and thus can be used on floors to be covered subsequently with paint, resilient tile, or other finishes. A-H Curing Compound #2 DR WB is a resin emulsion type curing material. It forms a continuous uniform film that adheres to fresh concrete and restricts moisture loss. A-H Curing Compound #2 DR WB meets VOC (Volatile Organic Compound) levels, and provides relative non-flammability. It is also available in fugitive dye formulation.
A-H Clear Cure is a water white, quick drying, polymer resin in a solvent solution. It is recommended for curing, hardening, and sealing all interior or exterior concrete and terrazzo surfaces. A-H Clear Cure protects slabs during construction and materially reduces clean-up costs. A-H Clear Cure will not affect the bond of subsequently applied finishes and is ideally suited for use on floors in industrial plants, warehouses, garages, or any place where an easily cleaned surface is required.
A-H Clear Cure WB is a clear, water based, quick drying, vinyltoluene acrylate polymer resin emulsion which is specially formulated for curing and sealing interior or exterior concrete and terrazzo surfaces. A-H Clear Cure WB protects slabs during construction and materially reduces clean-up costs. A-H Clear Cure WB is suited for use on floors in industrial plants, warehouses, garages, or any place where an easily cleaned surface is required. A-H Clear Cure WB meets VOC (Volatile Organic Compound) levels.
A-H Coal Tar Epoxy #210 is a 2 part coal tar modified liquid epoxy. This modified epoxy is a proven, economical, chemical resistant coating system for the protection of surfaces. A-H Coal Tar Epoxy #210 is a versatile material that may be used as a binder for durable, chemical resistant, patching mortars and toppings. It is also a coating for applied skid-proofing treatments. Typical applications are concrete tanks and pits, parking decks, bridges, waste water treatment plants, and chemical plants.
A-H Epoxy Coating #152 is a two component epoxy coating that provides protection to many surfaces against salt water, fresh water, most alkalis, and mild acids. It is used in sewage treatment plants, meat packing plants, dairies, washrooms, and all types of industrial areas.
A-H Emery Epoxy Topping #170 is a combination of epoxy resins and the hardest natural aggregates (A-H Emery). The single package formulation is easily mixed and installed. A-H Emery Epoxy Topping #170 is self bonding and can be feathered. This superior product produces surfaces that are extremely hard, non-slip, chemical and abrasion resistant. A-H Emery Epoxy Topping #170 is recommended for food processing plants, dairies, chemical plants, breweries, and other heavy duty applications. A-H Emery Epoxy Topping #170 is available in colors on special order.
A-H Epoxy Topping #140 is a combination of epoxy resins and high grade silica sand. The single package formulation is easily mixed and installed. A-H Silica Epoxy Topping #140 is self bonding and can be feathered. This superior product produces surfaces that are extremely hard, non-slip, chemical and abrasion resistant. A-H Silica Epoxy Topping #140 is recommended for food processing plants, dairies, chemical plants, breweries, and other heavy duty applications. A-H Silica Epoxy Topping #140 is available in colors on special order.
A-H Sure Step is a two component epoxy system containing the hardest natural aggregate, "Emerundum." A-H Emery grit is pre-blended into both liquid components. Most floors are easily treated to provide non-slip, chemical resistant, wear resistant, attractive surfaces. Most applications require only one coat. A-H Sure Step is available in regular and fine grade. Fine grade is formulated for surfaces that are required to be smooth for easy cleaning. A-H Sure Step is recommended for interior and exterior area surfaces in all types of chemical, food, beverage, meat processing, and industrial plants. It is also recommended for swimming pools, decks, washrooms, showers, loading docks, platforms, stair treads, veterinary clinics, and outdoor showers.
A-H 3 Way Sealer may be applied at the time of finishing as a combination curing, sealing, and dustproofing treatment. A-H 3 Way Sealer provides a water retaining film with penetrating qualities. Additional coats of A-H 3 Way Sealer provide excellent resistance to chloride salts and water penetration. A-H 3 Way Sealer is an effective treatment to prevent dusting concrete and to enhance the durability of concrete exposed to weather and salts. Typical applications are for parking garage slabs, warehouse floors, and any concrete where maximum protection is required. A-H 3 Way Sealer can be used where subsequent finishes (tile, carpet, etc.) are to be applied.
A-H 3 Way Sealer WB is a high solids, water borne vinyltoluene acrylate polymer sealer specifically formulated to cure, seal and dustproof concrete and masonry surfaces. A-H 3 Way Sealer WB provides excellent resistance to chloride salts and water penetration. Typical applications include parking garage slabs, warehouse floors, and any concrete or masonry surface where maximum protection is required. It meets VOC (Volatile Organic Compound) levels, provides relative non-flammability, imparts no objectionable odors, and is safe to use.
A-H Oilguard is a two component, self priming, quick drying, polymeric epoxy resin solution which exhibits excellent resistance to many chemicals such as gasoline and oil. With its excellent abrasion resistance, A-H Oilguard is ideal for sealing concrete floors in auto dealerships, gas stations, vehicle maintenance facilities, machine shops, parking garages, and driveways. A-H Oilguard is available in clear and colors.
A-H Urethane Floor Coat forms a clear, high gloss, tough, slip and abrasion resistant film for concrete and masonry floors and walls as well as other high-service applications on metal and wood. It has excellent resistance to wear, spillage, oils, grease, salts chemicals, and mild acids. It is recommended for showrooms, warehouses, parking garages, aircraft hangers, breweries, textile mills, and other industrial and retail facilities. A-H Urethane Floor Coat is available in the following versions: (I) A-H Urethane Floor Coat (Aromatic)- Economical formulation for interior use where there is no exposure to sunlight and (ii) A-H Urethane Floor Coat (Aliphatic)- A formulation for exterior and interior use that is UV resistant.
A-H Epoxy Hi-Build #197, 100% solids is available in self leveling formulation for horizontal and in non-sag for vertical surfaces. It is an easily mixed, two component material. It is particularly effective as a swimming pool finish, as a traffic aisle coating, and for any area where a heavy-duty, tile-like surface is required. A-H Epoxy Hi-Build #197 is available in both vertical (for walls) and horizontal (for floors) grades, and in clear and color versions.
A-H Anti-Spalling Compound is a balanced formula of special linseed oil and hydrocarbon based solvents. It was developed to prevent the spalling and disintegration of exposed concrete surfaces. The destructive effects of freeze-thaw cycles, de-icing salts, and chemicals are minimized by the protective action of the A-H Anti-Spalling Compound. The compound penetrates deeply into the concrete and protects the surface.
Standard A-H Emery Silica Topping #140 and A-H Emery Epoxy Topping #170 are one package formulations containing pre-measured volumes of epoxy resin, reactor, and special aggregates. With the continuing rise in transportation costs, it has become economical on large projects to use a matrix and aggregates at the site. A-H Epoxy Liquid Binder #2000 is extensively used as the binder for filled high quality aggregates in "trowel-down" abrasion and chemical resistant topping mortars or self leveling grouts, as the binder for high quality aggregates in "seeded" applications and as a chemical resistant coating by itself. A-H Emery, silica sand, traprock or ceramic quartz, dry and free from foreign materials, are some of the suitable high quality aggregates. Cured A-H Epoxy Liquid Binder #2000 provides protection from chemical exposures as well as heavy traffic. It is extensively used in industrial, chemical and food processing plants.
A-H Epoxy Liquid Binder #2112 is extensively used as a chemical resistant coating by itself, as the binder for high quality aggregates in "seeded" applications and as the binder for filled high quality aggregates in "trowel-down" abrasion and chemical resistant topping mortars or self leveling grouts. A-H Emery, silica sand, traprock or ceramic quartz, dry and free from foreign materials, are some of the suitable high quality aggregates. Cured A-H Epoxy Liquid Binder #2112 remains flexible enough to take a 1/8" mandrel bend without loss of adhesion, and retains a sword hardness of 60. It exhibits outstanding ability to resist chipping, cracking or peeling. It adheres to glass, metal concrete, masonry and primed wood. It provides outstanding protection from chemical exposures, particularly from acid and alkali exposures. It is extensively used in battery acid rooms, and industrial, chemical and food processing plants.
A-H Epoxy Liquid Binder #2115 is extensively used as a chemical resistant coating by itself, as the binder for high quality aggregates in "seeded" applications and as the binder for filled high quality aggregates in "trowel-down" abrasion and chemical resistant topping mortars or self leveling grouts. A-H Emery, silica sand, traprock or ceramic quartz, dry and free from foreign materials, are some of the suitable high quality aggregates. Cured A-H Epoxy Liquid Binder #2115 remains flexible enough to take a 1/8" mandrel bend without loss of adhesion, and retains a sword hardness of 60. It exhibits outstanding ability to resist chipping, cracking or peeling. It adheres to glass, metal concrete, masonry and primed wood. It provides outstanding protection from solvent, chemical, fume, acid, alkalis, salt, oil, and grease exposures as well as abrasion. It is extensively used in industrial, chemical and food processing plants.
A-H Tung Oil Sealer is a petroleum distillates borne tung oil concrete floor sealer. A-H Tung Oil Sealer, when applied to concrete, produces a sealed and non-dusting finish. A-H Tung Oil Sealer is furnished ready to use and requires no dilution prior to application.
A-H Epoxy Primer #58 is a two component, multi use, clear polyamide epoxy primer with exceptional bonding properties. A-H Epoxy Primer #58 is recommended as a primer for use with A-H Traffic Deck, A-H Urethane Floor Coat, A-H Polysealants, and most epoxy based coatings of Anti-Hydro International, Inc.
A-H Epoxy Primer #58 WB is a two component, multi use, water borne epoxy primer. A-H Epoxy Primer #58 WB greatly improves bond strength or bonding and has excellent water resisting properties. It is recommended as a primer for A-H Leveltec STD and most of the Anti-Hydro sealants or coatings. It is used; where additional bond strength is required over existing coatings, for dusting surfaces, on asphalt contaminated surfaces, and as a barrier between asphalt and coat tar products. A-H Epoxy Primer #58 WB meets VOC (Volatile Organic Compound) levels, is non-flammable, and does not emit objectionable odor or fumes.
A-H Primer UR #24 is a one component, aromatic polyisocyanate based primer. It is recommended as a priming coat for polysulfide and urethane elastomeric sealants, such as A-H Polysealant "U" (Pour Grade or Gun Grade), A-H Polysealant "T" (Pour Grade or Gun Grade), and A-H Urethane Bitumen Sealant JFR. It provides exceptional bonding of polysulfide and urethane elastomeric sealants to concrete and masonry surfaces.
|
SECTION-6 
