ADMIXTURE FOR:

WATERPROOFING
INCREASED HYDRATION
​COMPRESSIVE  STRENGTH
FLEXURAL STRENGTH
TENSILE STRENGTH
Anti-Hydro is extensively recommended for integrally waterproofing concrete and mass concreting. Anti-Hydro is a
​non-corrosive solution of organic and inorganic chemicals that reacts with Portland cement to produce more complete hydration. Water requirements, bleed water, capillaries and shrinkage are reduced. The increased hydration provides internal curing and a much harder cement paste.

Anti-Hydro increases the early and ultimate strength of concrete. These combined reactions produce impermeable concrete that is hard and non-dusting. It is suitable for potable water and subsequent finishing applications.
  • FEATURES
  • BENEFITS
<
>
  • RESISTS EXTREME HYDROSTATIC PRESSURE FROM ​POSITIVE AND NEGATIVE SIDE
  • PROVIDES MOISTURE RESISTANCE
  • PROVIDES SUPERIOR CHEMICAL RESISTANCE
  • RESISTANT TO FREEZE-THAW CYCLES
  • REDUCES OR ELIMINATE EFFLORESCENCE
  • NON-TOXIC, PERMANENT & EASY TO USE
  • COMPLIES WITH NSF STD 61 FOR POTABLE WATER
  • INCREASED COMPRESSIVE STRENGTH EARLY & ULTIMATE​
  • ACCELERATED SET / REDUCED SHRINKAGE
  • WATERPROOF / IMPERMEABLE CONCRETE
  • INCREASED FLEXURAL STRENGTH
  • INCREASED TENSILE STRENGTH
  • INCREASED BOND SHEAR STRENGTH
  • INCREASED TENSILE SHEAR STRENGTH
  • IMPROVED ABRASION RESISTANCE
  • IMPROVED CHEMICAL RESISTANCE
  • ​HIGH STRENGTH - Dramatically increases strength - compressive, flexural & tensile
  • HARDENING & DENSIFYING - Over 30% harder and denser
  • WATER VAPOR CONTROL - Reduces all vapor transmission up to 85%
  • INCREASED ABRASION RESISTANCE - Resists scratches, gouges & wear due to increased hardness
  • COLD WEATHER PROTECTION - Keeps concrete & mortar from freezing, sets quickly
  • CORROSION RESISTANCE - ​No penetration of chemicals minimizes corrosion

All of these attributes add up to DURABILTY!

​Do Not use Anti-Hydro in pre-stressed and post-tensioned applications.

INTENDED USE

PRECAST
STRUCTURAL CONCRETE
SWIMMING POOLS
BASEMENTS
CHIMNEYS
CEMENT PARGETING
PATCHING FOUNDATIONS​
ELEVATOR PITS
SEWAGE & WATER TREATMENT PLANTS
SEAWALL CONSTRUCTION
TUNNELS
UNDERGROUND UTILITY CONSTRUCTION
SLABS-ON-GRADE
​FOUNDATIONS
TANKS
TILT-UPS
COUNTERTOPS
PAVEMENTS
COLD WEATHER
ANYTIME MORE COMPLETE HYDRATION
OF CEMENT IS DESIRED.

HYDRATION COMPARISON
​STRENGTH TEST

COMPRESSIVE STRENGTH PSI @ 28 DAYS

Without Anti-Hydro

4808psi
CEMENT & WATER
CT SCAN IMAGE
CONCRETE FORMULATION WITHOUT ANTI-HYDRO
BLUE SHOWS APPROX 65%  HYDRATION

With Anti-Hydro

>6000psi
CEMENT, WATER & ANTI-HYDRO
CT SCAN IMAGE
​CONCRETE FORMULATION WITH ANTI-HYDRO
BLUE SHOWS APPROX 95% HYDRATION
If you would like to learn more about hydration contact us today CLICK HERE