The "one & only" since 1904
For over 120 years, Anti-Hydro Products, LLC has been integrally waterproofing many concrete and masonry structures all over the globe. The success of our flagship product Anti-Hydro AH-1 or "AH-1", has been attested not only by the commercial recognition accorded by its uses in many prestigious projects worldwide, but also by tests performed by many governmental agencies and accredited independent laboratories.
Invented and developed in 1900 in the laboratories of Stevens Institute of Technology in Hoboken, New Jersey.
AH-1 was the ground breaking integral waterproofing compound and has remained unchanged for more than 120 years.
Invented and developed in 1900 in the laboratories of Stevens Institute of Technology in Hoboken, New Jersey.
AH-1 was the ground breaking integral waterproofing compound and has remained unchanged for more than 120 years.
A testament to its proven waterproofing
efficacy, reliability and durability.
AH-1 is a combination of organic and inorganic chemicals that reacts with Portland cement to produce more complete hydration. Water requirements, bleed water and shrinkage are reduced. The increased hydration provides internal curing and a much harder cement paste. AH-1 increases the early and ultimate strength of concrete. These combined reactions produce impermeable concrete that is hard and non-dusting.
AH-1's primary function is the waterproofing of concrete. The true advantages go far beyond the waterproofing. Anti-Hydro reacts chemically with Portland cement increasing the hydration percentage of the cement by as much as 30%. The morphology
of the concrete is altered significantly reducing the porosity and eliminating the migration of liquid and gas into or out of the set concrete. The changes at the molecular and structural level created by the use of AH-1 provide incredible benefits.
AH-1's primary function is the waterproofing of concrete. The true advantages go far beyond the waterproofing. Anti-Hydro reacts chemically with Portland cement increasing the hydration percentage of the cement by as much as 30%. The morphology
of the concrete is altered significantly reducing the porosity and eliminating the migration of liquid and gas into or out of the set concrete. The changes at the molecular and structural level created by the use of AH-1 provide incredible benefits.
AMERICAN MADE
WITH AMERICAN PRIDE
OUR PRODUCTS
Concrete/Masonry Products & Problem Solving Worldwide Since 1904
THROUGHOUT THE ENTIRE WORLD ARE MONUMENTS OF
ARCHITECTURAL BEAUTY WHERE ANTI-HYDRO PRODUCTS HAS PLAYED
AN IMPORTANT PART IN THE PRESERVATION OF CONCRETE WORK.
CHRYSLER BUILDING
SEARS/WILLIS TOWER
WALDORF ASTORIA NYC
EMPIRE STATE BUILDING
For over one hundred twenty years it has been in continuous use, AH-1 has been specified for permanently hardening and waterproofing concrete for every type of structure. Government buildings, where careful comparative tests have been conducted, are no exception. Sureness as well as permanence are the two words which best characterize AH-1 results. You write them both into your specification when you specify AH-1.
By specifying AH-1 you not only select a tried and proved material for your client, but you also indicate to the contractor your preference for a material which, by its very performance, has removed all doubt from the results you expect from him.
By specifying AH-1 you not only select a tried and proved material for your client, but you also indicate to the contractor your preference for a material which, by its very performance, has removed all doubt from the results you expect from him.
