Anti-Hydro International, Inc.

“ANTI-HYDRO®” is extensively recommended for integrally water-proofing concrete. It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt- ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ® ”-R is extensively recommended for integrally waterproofing concrete and mass concreting). It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“ANTI-HYDRO ® ”-NC is extensively recommended for integrally waterproofing concrete. It has been successfully used for over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt-ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ®”-NCR is extensively recommended for integrally waterproofing concrete. It has been successfully used over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®”-NC is extensively recommended for integrally waterproofing. It has been successfully used over many decades in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®”-NCR “ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used over many decades in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

A-H ® HYDROCAP ADMIX is a unique crystal-forming dry admix that has been successfully used over many decades to integrally waterproof concrete or masonry and to improve the durability. Installations include foundations, elevator pits, reservoirs, sewage and water treatment facilities, underground utility construction, slabs-on-grade, tanks, and wherever it is necessary to protect concrete from water intrusion. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP POWDER is a crystal-forming waterproofing slurry coat dry premix that has been widely used over many decades for waterproofing concrete or masonry. On surfaces of existing concrete or masonry, a slurry coat of A-H ® HYDROCAP POWDER is applied using brush or spray. On surfaces of new concrete or masonry, A-H ® HYDROCAP POWDER is applied using shake-on methods. It is suitable for interior or exterior, below or above grade, positive or negative side surfaces. Typical uses include foundations or basements, retaining wall, concrete floors or slabs, water retaining or secondary containment structures, underground vaults, swimming pools, sewage or water treatment facilities, elevator pits, reservoirs, fountains, etc. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP ADMIX is a unique crystal-forming dry admix that has been successfully used over many decades to integrally waterproof concrete or masonry and to improve the durability. Installations include foundations, elevator pits, reservoirs, sewage and water treatment facilities, underground utility construction, slabs-on-grade, tanks, and wherever it is necessary to protect concrete from water intrusion. It is suitable for potable water and subsequent finishing applications.

A-H ® METALLIC WATERPROOFING is an iron type cement coat that has been extensively used and recommended over many decades for parget coat hydrolithic waterproofing of interior concrete surfaces. Typical installations include elevator, sump and other pits, and interior surfaces of pipe and other utility tunnels.

A-H ® METALLIC WATERPROOFING is an iron type cement coat that has been extensively used and recommended over many decades for parget coat hydrolithic waterproofing of interior concrete surfaces. Typical installations include elevator, sump and other pits, and interior surfaces of pipe and other utility tunnels.

A-H ® HYDROCAP POWDER is a crystal-forming waterproofing slurry coat dry premix that has been widely used over many decades for waterproofing concrete or masonry. On surfaces of existing concrete or masonry, a slurry coat of A-H ® HYDROCAP POWDER is applied using brush or spray. On surfaces of new concrete or masonry, A-H ® HYDROCAP POWDER is applied using shake-on methods. It is suitable for interior or exterior, below or above grade, positive or negative side surfaces. Typical uses include foundations or basements, retaining wall, concrete floors or slabs, water retaining or secondary containment structures, underground vaults, swimming pools, sewage or water treatment facilities, elevator pits, reservoirs, fountains, etc. It is suitable for potable water and subsequent finishing applications.

A-H ® ANCHOR MASONRY SURFACER (AMS) is a decorative cement based masonry coating that has been extensively used and recommended over many decades to protect, beautify, and waterproof all types of masonry, in or outside, above or below grade. Typical installations include residential, commercial and, industrial buildings, fountains, swimming pools and cisterns. A-H ® ANCHOR MASONRY SURFACER (AMS) is available in standard and special colors, and is suitable for use with potable water.

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“ANTI-HYDRO®” is extensively recommended for integrally water-proofing concrete. It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt- ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ® ”-R is extensively recommended for integrally waterproofing concrete and mass concreting). It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“ANTI-HYDRO ® ”-NC is extensively recommended for integrally waterproofing concrete. It has been successfully used for over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt-ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ®”-NCR is extensively recommended for integrally waterproofing concrete. It has been successfully used over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-NCR is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used over many decades on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid-containing masonry structures, repairs of leaking structures, etc.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®”-NC is extensively recommended for integrally waterproofing. It has been successfully used over many decades in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®”-NCR “ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used over many decades in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

A-H ® ANCHOR MASONRY SURFACER (AMS) is a decorative cement based masonry coating that has been extensively used and recommended over many decades to protect, beautify, and waterproof all types of masonry, in or outside, above or below grade. Typical installations include residential, commercial and, industrial buildings, fountains, swimming pools and cisterns. A-H ® ANCHOR MASONRY SURFACER (AMS) is available in standard and special colors, and is suitable for use with potable water.

A-H ® ANCHOR PLUG is a quick setting, non-shrink, non-corrosive and high strength cement compound that is extensively recommended for decades for plugging leaks, repairing cracks, and filling joints in concrete and masonry structures. Typical installations include sealing around pipes and conduits, setting anchor bolts, posts and railing, swimming pools, sea walls, water storage and sewage facilities, utility vaults, tunnels, fountain, water channel, drains, ponds, piers, etc.

A-H ® TRAFFIC DECK membrane is a two-component fluid applied polyurethane formula which cures to form a continuous membrane that is water and abrasion resistant, tough and flexible. A-H ® concrete, metal and wood surfaces. Typical installations include balconies, parking decks, tanks, pools, etc. It is available in color. A-H ® TRAFFIC DECK has been widely used and specified over many decades for waterproofing and protecting

“ANTI-HYDRO®” is extensively recommended for integrally water-proofing concrete. It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt- ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ® ”-R is extensively recommended for integrally waterproofing concrete and mass concreting). It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“ANTI-HYDRO ® ”-NC is extensively recommended for integrally waterproofing concrete. It has been successfully used for over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt-ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ®”-NCR is extensively recommended for integrally waterproofing concrete. It has been successfully used over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-NCR is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used over many decades on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid-containing masonry structures, repairs of leaking structures, etc.

A-H ® METALLIC WATERPROOFING is an iron type cement coat that has been extensively used and recommended over many decades for parget coat hydrolithic waterproofing of interior concrete surfaces. Typical installations include elevator, sump and other pits, and interior surfaces of pipe and other utility tunnels.

A-H ® HYDROCAP POWDER is a crystal-forming waterproofing slurry coat dry premix that has been widely used over many decades for waterproofing concrete or masonry. On surfaces of existing concrete or masonry, a slurry coat of A-H ® HYDROCAP POWDER is applied using brush or spray. On surfaces of new concrete or masonry, A-H ® HYDROCAP POWDER is applied using shake-on methods. It is suitable for interior or exterior, below or above grade, positive or negative side surfaces. Typical uses include foundations or basements, retaining wall, concrete floors or slabs, water retaining or secondary containment structures, underground vaults, swimming pools, sewage or water treatment facilities, elevator pits, reservoirs, fountains, etc. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP ADMIX is a unique crystal-forming dry admix that has been successfully used over many decades to integrally waterproof concrete or masonry and to improve the durability. Installations include foundations, elevator pits, reservoirs, sewage and water treatment facilities, underground utility construction, slabs-on-grade, tanks, and wherever it is necessary to protect concrete from water intrusion. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP MORTAR is a crystal-forming waterproofing mortar dry premix that has been widely used over many decades for waterproofed filling of reglets and coves and patching surface defects in concrete or masonry that is to receive a crystalline waterproofing slurry coat of A-H POWDER. It is suitable for potable water and subsequent finishing applications.

A-H ® SEAMLESS MEMBRANE PF is a fluid applied polyurethane formulation which cures to form a tough, flexible, waterproofing membrane. A-H ® SEAMLESS MEMBRANE PF has been widely used and specified over many decades for waterproofing and protecting two-course concrete slab construction like parking garages, single-course constructions like base slabs in terrazzo floor and between the structural slabs and concrete topping. It is available in vertical or horizontal formulation.

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-NCR is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used over many decades on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid-containing masonry structures, repairs of leaking structures, etc.

A-H ® ANCHOR MASONRY SURFACER (AMS) is a decorative cement based masonry coating that has been extensively used and recommended over many decades to protect, beautify, and waterproof all types of masonry, in or outside, above or below grade. Typical installations include residential, commercial and, industrial buildings, fountains, swimming pools and cisterns. A-H ® ANCHOR MASONRY SURFACER (AMS) is available in standard and special colors, and is suitable for use with potable water.

A-H ® SEAMLESS MEMBRANE PF is a fluid applied polyurethane formulation which cures to form a tough, flexible, waterproofing membrane. A-H ® SEAMLESS MEMBRANE PF has been widely used and specified over many decades for waterproofing and protecting two-course concrete slab construction like parking garages, single-course constructions like base slabs in terrazzo floor and between the structural slabs and concrete topping. It is available in vertical or horizontal formulation.

A-H ® TRAFFIC DECK membrane is a two-component fluid applied polyurethane formula which cures to form a continuous membrane that is water and abrasion resistant, tough and flexible. A-H ® concrete, metal and wood surfaces. Typical installations include balconies, parking decks, tanks, pools, etc. It is available in color. A-H ® TRAFFIC DECK has been widely used and specified over many decades for waterproofing and protecting

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-NCR is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used over many decades on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid-containing masonry structures, repairs of leaking structures, etc.

A-H ® METALLIC WATERPROOFING is an iron type cement coat that has been extensively used and recommended over many decades for parget coat hydrolithic waterproofing of interior concrete surfaces. Typical installations include elevator, sump and other pits, and interior surfaces of pipe and other utility tunnels.

A-H ® HYDROCAP POWDER is a crystal-forming waterproofing slurry coat dry premix that has been widely used over many decades for waterproofing concrete or masonry. On surfaces of existing concrete or masonry, a slurry coat of A-H ® HYDROCAP POWDER is applied using brush or spray. On surfaces of new concrete or masonry, A-H ® HYDROCAP POWDER is applied using shake-on methods. It is suitable for interior or exterior, below or above grade, positive or negative side surfaces. Typical uses include foundations or basements, retaining wall, concrete floors or slabs, water retaining or secondary containment structures, underground vaults, swimming pools, sewage or water treatment facilities, elevator pits, reservoirs, fountains, etc. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP ADMIX is a unique crystal-forming dry admix that has been successfully used over many decades to integrally waterproof concrete or masonry and to improve the durability. Installations include foundations, elevator pits, reservoirs, sewage and water treatment facilities, underground utility construction, slabs-on-grade, tanks, and wherever it is necessary to protect concrete from water intrusion. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP MORTAR is a crystal-forming waterproofing mortar dry premix that has been widely used over many decades for waterproofed filling of reglets and coves and patching surface defects in concrete or masonry that is to receive a crystalline waterproofing slurry coat of A-H POWDER. It is suitable for potable water and subsequent finishing applications.

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-NCR is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used over many decades on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid-containing masonry structures, repairs of leaking structures, etc.

A-H ® METALLIC WATERPROOFING is an iron type cement coat that has been extensively used and recommended over many decades for parget coat hydrolithic waterproofing of interior concrete surfaces. Typical installations include elevator, sump and other pits, and interior surfaces of pipe and other utility tunnels.

A-H ® HYDROCAP POWDER is a crystal-forming waterproofing slurry coat dry premix that has been widely used over many decades for waterproofing concrete or masonry. On surfaces of existing concrete or masonry, a slurry coat of A-H ® HYDROCAP POWDER is applied using brush or spray. On surfaces of new concrete or masonry, A-H ® HYDROCAP POWDER is applied using shake-on methods. It is suitable for interior or exterior, below or above grade, positive or negative side surfaces. Typical uses include foundations or basements, retaining wall, concrete floors or slabs, water retaining or secondary containment structures, underground vaults, swimming pools, sewage or water treatment facilities, elevator pits, reservoirs, fountains, etc. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP ADMIX is a unique crystal-forming dry admix that has been successfully used over many decades to integrally waterproof concrete or masonry and to improve the durability. Installations include foundations, elevator pits, reservoirs, sewage and water treatment facilities, underground utility construction, slabs-on-grade, tanks, and wherever it is necessary to protect concrete from water intrusion. It is suitable for potable water and subsequent finishing applications.

A-H ® HYDROCAP MORTAR is a crystal-forming waterproofing mortar dry premix that has been widely used over many decades for waterproofed filling of reglets and coves and patching surface defects in concrete or masonry that is to receive a crystalline waterproofing slurry coat of A-H POWDER. It is suitable for potable water and subsequent finishing applications.

“ANTI-HYDRO®” is extensively recommended for integrally water-proofing concrete. It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt- ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ® ”-R is extensively recommended for integrally waterproofing concrete and mass concreting). It has been successfully used since 1904 in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

“ANTI-HYDRO ® ”-NC is extensively recommended for integrally waterproofing concrete. It has been successfully used for over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt-ups, countertops, pre-casts and pavements, etc.

“ANTI-HYDRO ®”-NCR is extensively recommended for integrally waterproofing concrete. It has been successfully used over many decades in all types of structures to waterproof concrete and to improve its workability, strength, hardness, and durability. Installations include foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, etc.

A-H ® HYDROCAP MORTAR is a crystal-forming waterproofing mortar dry premix that has been widely used over many decades for waterproofed filling of reglets and coves and patching surface defects in concrete or masonry that is to receive a crystalline waterproofing slurry coat of A-H POWDER. It is suitable for potable water and subsequent finishing applications.

A-H® AXPANDCRETE S HI-FLOW is ready to use, specially graded silica quartz aggregates mixed non-shrink grout that .has been extensively used and recommended over many decades for applications where high strength and positive expansion from the time of placement, without intermediate shrinkage, is desired. Typical applications include installation of machinery and equipment; grouting of column base plates, rails, and anchor bolts; patching floors; grouting precast sections at juncture points; grouting decorative railing; and re-pointing mortar joints and structural cracks.

A-H ® POLYSEALANT “T” is a two parts, polysulfide, non-sag (gun grade) sealant that has been effectively used for many decades to maintain an effective bond between materials of similar or dissimilar porosities, surface texture, or expansion coefficients. It is resistant to the effects of sunlight, rain, dirt, snow, ozone, aging, shrinkage, and the daily and seasonal cyclic changes in temperature, even after years of exposure and is particularly effective where exposure to solvents or chemicals are anticipated. A-H ® POLYSEALANT “T” provides a durable, elastomeric, weather-tight seal for all caulking Joints, moving and non-moving, in commercial and industrial projects. Typical applications include swimming pools, fountains, cooling towers fuel and chemical storage tanks, wastewater treatment and petrochemical plants.

A-H ® POLYSEALANT “U” is a two part, urethane formulation that has been extensively used and specified for many decades as a cold applied general purpose elastomeric sealant for joints subjected to structural movements. It will bond to a variety of surfaces including concrete, stone, brick, wood, glass, metal, block, bitumen, and most plastics. A-H ® POLYSEALANT “U” is ideal for sealing expansion, control and construction joints, exterior or interior, in plazas, malls, pavement, tilt-up construction, panel wall joints and other areas subjected to foot and vehicular traffic or where movement is anticipated, or subjected to water immersion.

A-H ® EPOXY PATCH #122 is a versatile, non-sagging epoxy mortar adhesive that has been extensively used and specified over many decades as a mortar adhesive for bonding and as a patching material for filling in holes, cracks, joints, or coves and for waterproofing. It has a multitude of uses for all types of construction and maintenance projects. It meets AIM VOC requirements.

A-H® EPOXY CRACK FILLER #131 is a two component, pourable and brushable clear epoxy formulation that has been extensively used and specified over many decades as a filler for fine cracks and as a coating for soft concrete. It has been used on all types of construction and maintenance projects to restore structural integrity and prevent deterioration. It meets AIM VOC requirements

A-H® GROOVE & CRACK FILLER #250 is a two component, elastic type, modified epoxy joint filler that has been extensively used and specified over many decades for filling and sealing narrow control joints and grooves. It has been used on all types of construction and maintenance projects to restore structural integrity and prevent deterioration or damage. A-H ® GROOVE & CRACK FILLER #250 is particularly desirable for joints in concrete floors that are subjected to abrasion, heavy traffic, and loads. It complies with AIM VOC requirements.

“Anti-Hydro ® ” is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-R is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used since 1904 on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid- containing masonry structures, repairs of leaking structures, etc.

“Anti-Hydro ®”-NCR is extensively recommended for cement parget coat (hydrolithic) waterproofing. It has been successfully used over many decades on concrete and masonry surfaces, both, exterior or interior, above or below grade, positive or negative side to provide a continuous waterproof envelope. It improves workability, strength, hardness, and durability. Installations include foundations, tanks, cisterns and all types of liquid-containing masonry structures, repairs of leaking structures, etc.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®”-NC is extensively recommended for integrally waterproofing. It has been successfully used over many decades in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

“ANTI-HYDRO ®”-NCR “ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used over many decades in all types of brick, stone and tile installations for waterproofing mortar, and to improve its workability, strength, hardness, and durability. It also provides protection against freeze/thaw damage.

A-H ® ANCHOR MASONRY SURFACER (AMS) is a decorative cement based masonry coating that has been extensively used and recommended over many decades to protect, beautify, and waterproof all types of masonry, in or outside, above or below grade. Typical installations include residential, commercial and, industrial buildings, fountains, swimming pools and cisterns. A-H ® ANCHOR MASONRY SURFACER (AMS) is available in standard and special colors, and is suitable for use with potable water.

A-H® AXPANDCRETE S HI-FLOW is ready to use, specially graded silica quartz aggregates mixed non-shrink grout that .has been extensively used and recommended over many decades for applications where high strength and positive expansion from the time of placement, without intermediate shrinkage, is desired. Typical applications include installation of machinery and equipment; grouting of column base plates, rails, and anchor bolts; patching floors; grouting precast sections at juncture points; grouting decorative railing; and re-pointing mortar joints and structural cracks.

A-H ® POLYSEALANT “T” is a two parts, polysulfide, non-sag (gun grade) sealant that has been effectively used for many decades to maintain an effective bond between materials of similar or dissimilar porosities, surface texture, or expansion coefficients. It is resistant to the effects of sunlight, rain, dirt, snow, ozone, aging, shrinkage, and the daily and seasonal cyclic changes in temperature, even after years of exposure and is particularly effective where exposure to solvents or chemicals are anticipated. A-H ® POLYSEALANT “T” provides a durable, elastomeric, weather-tight seal for all caulking Joints, moving and non-moving, in commercial and industrial projects. Typical applications include swimming pools, fountains, cooling towers fuel and chemical storage tanks, wastewater treatment and petrochemical plants.

A-H ® POLYSEALANT “U” is a two part, urethane formulation that has been extensively used and specified for many decades as a cold applied general purpose elastomeric sealant for joints subjected to structural movements. It will bond to a variety of surfaces including concrete, stone, brick, wood, glass, metal, block, bitumen, and most plastics. A-H ® POLYSEALANT “U” is ideal for sealing expansion, control and construction joints, exterior or interior, in plazas, malls, pavement, tilt-up construction, panel wall joints and other areas subjected to foot and vehicular traffic or where movement is anticipated, or subjected to water immersion.

A-H ® EPOXY PATCH #122 is a versatile, non-sagging epoxy mortar adhesive that has been extensively used and specified over many decades as a mortar adhesive for bonding and as a patching material for filling in holes, cracks, joints, or coves and for waterproofing. It has a multitude of uses for all types of construction and maintenance projects. It meets AIM VOC requirements.

A-H® EPOXY CRACK FILLER #131 is a two component, pourable and brushable clear epoxy formulation that has been extensively used and specified over many decades as a filler for fine cracks and as a coating for soft concrete. It has been used on all types of construction and maintenance projects to restore structural integrity and prevent deterioration. It meets AIM VOC requirements

A-H® GROOVE & CRACK FILLER #250 is a two component, elastic type, modified epoxy joint filler that has been extensively used and specified over many decades for filling and sealing narrow control joints and grooves. It has been used on all types of construction and maintenance projects to restore structural integrity and prevent deterioration or damage. A-H ® GROOVE & CRACK FILLER #250 is particularly desirable for joints in concrete floors that are subjected to abrasion, heavy traffic, and loads. It complies with AIM VOC requirements.

“ANTI-HYDRO ®” is extensively recommended for integrally waterproofing. It has been successfully used since 1904 in all types of brick, stone an